Tap water is not always safe to consume. It sometimes contains harmful contaminants that can stick around in your body for far too long. So, if you live in an area with poor tap water quality or recently had your drinking water tested and decided you want to have a filtration system in place. These are the best filtered watcher pitchers to buy.
Remember, not only will a good filter remove impurities, but it'll also improve the taste and clarity of water. And compared with buying bottled water, using a water filter pitcher is substantially more affordable (we did the math).
The team here at our lab settled on three primary tests to benchmark the efficacy of these filters: TDS, pH and chlorine. Before we began the actual testing process, each pitcher was removed from the packaging, cleaned and then prepared per the manufacturer's instructions. This is very important, as most of these pitchers utilize activated carbon filters, which will deposit sediment into the first batches of water that you filter if not cleaned properly in advance.
Our Picks
What's the best water filter pitcher?
After rigorous testing, we found the ZeroWater 12-cup Water Filter Pitcher to be the best overall filter pitcher for 2024. It was unmatched in removing contaminants.
If you're ready to take home a pitcher for cleaner, better-tasting water, without the cost of bottled varieties, check out our rundown below. We've run all the tests, and we settled on the following models as the best water filter pitchers of 2024. Keep reading if you're thirsty for the details.
Best water filter pitchers of 2025
- Most effective at removing dissolved solids
- Available in several sizes and styles
- Filters are expensive
- Takes longer to filter
Have you ever raised an eyebrow reading a company's marketing claims? I once tested a flashlight that claimed a lumen output of 200,000; bright enough to be seen from an airliner. The true value turned out to be a much more realistic 1,500 lumens. Suffice it to say, I had my doubts when I read that ZeroWater could consistently remove a perfect 100% of TDS from water filtered through it.
ZeroWater is confident for a reason and even provides its own TDS testing meter with every pitcher to prove it. Although we still used our own test meter, the results were identical: 0 TDS remained across every trial and no chlorine was left suspended in the water either.
This formidable water purifier pitcher is also affordable and sturdy, and it's available in a few sizes, all of which use the same five-stage filter to great effect. Those include a smaller 10-cup round pitcher, a 23-cup dispenser with a spigot and even a massive 5-gallon water jug that can be fitted onto a water cooler. Most of the sizes (minus the gallon jugs, of course) are storage-friendly, so you can keep them in your refrigerator easily. The only downside to these powerhouse filters is that they're a bit more expensive to replace, and it takes them somewhat longer to filter compared to the rest of the field, but neither is much of a surprise given how much better they actually filter the water.
- Does a solid job filtering water
- Inexpensive
- Removed fewer TDS than the ZeroWater pitcher
- Some models feel cheaply made
Brita is probably the best-known of the water filter pitcher brands, and while it wasn't included in our most recent round of tests, it still performed quite well in previous rounds of at-home testing, second only to the ZeroWater in the removal of total dissolved materials. The Brita extracted about 40% of the TDS; not a bad showing, but still significantly less than the winner.
This model is a few bucks cheaper than a ZeroWater pitcher of the same size, making it one of the most budget-friendly water filter pitcher options. It comes with one filter and to make things even more cost-efficient, the replacement filters can be purchased for about $6 each if you buy them in a multipack. Each one is said to filter 40 gallons of water, enough for roughly two months of steady use (the same lifespan as ZeroWater). Brita also makes a more expensive "Longlast" filter that's designed to last three times as long as the standard filter. We tested one and found it performed significantly worse than the standard "Legacy" Brita filter.
- Elegant design
- Made from glass and stainless steel
- Expensive
- Breakable
This stylish Swedish kitchen brand is best known for its elegant sparkling water makers but now offers an equally eye-catching filter pitcher. It was the best looking of the bunch, made from a glass and stainless steel frame with a sleek overall design. It also did well in our tests, removing the second most dissolved solids from our tap water. Plus, this pitcher is good-looking enough to set out for a dinner party. It's not as efficient as our top pick, the ZeroWater filter pitcher, but is about on par with the Brita pitcher models. Plus, this pitcher is good-looking enough to set this out for a dinner party.
It's worth noting that the Aarke has a reusable filter so you only buy the granules that are easily loaded into the metal filter cartridge and save a bit on plastic waste. A three-pack of filter granules costs $20 on Aarke's website, about the same price as Brita replacement filters and less than half of what you'd pay for ZeroWater filters. One package of granules is estimated to filter about 31.7 gallons of water. That's about 9 gallons less than Brita claims its filters will purify. You can also buy Aarke enriching granules to alkalinize your water if you prefer.
You can also buy Aarke enriching granules ($30) to alkalinize your water if you prefer.
- Best for adding alkaline to water
- Water filtered with this pitcher tasted great
- Expensive
- Benefits of alkalinized water are murky
If the goal is to add alkaline to your water, then you'll want a completely different model. In a previous round of filter testing, we ran pH readings (measurements of how acidic or basic your water is) ranging from zero to 14; seven is a neutral reading.
Despite conflicting research on the topic, some people attribute health benefits to more basic (or alkaline) water. As a result, select companies make water pitchers with filters that actually add nutrients as your tap water passes through. The Seychelle pH20 pitcher took tap water from an already basic reading of 8.39 to 10.1, the largest increase out of the three alkaline pitchers in our test group. This pitcher's water filtration system uses two filters at a time, but they are supposed to last for up to 200 gallons.
- Long-lasting filters don't need to be replaced very often
- Replacement filters sell in an affordable 3-pack
- Filtering performance wasn't quite as strong as the competition
With the outliers in terms of performance and presentation out of the way, the rest of the pack starts to look a lot more similar. If all you’re looking for is a quick, effective water filter pitcher that won’t require you to change the filters all the time, we recommend the Waterdrop 10-cup Water Filter Pitcher, which typically costs $30 or less. In terms of performance, it made a respectable dent in the TDS of our tap water, but where the Waterdrop really shines is in the lifespan of its filters. These filters last 200 gallons, while the rest of the units we tested range from 40-60 gallons. Better still, replacement filters are available in a three-pack for $33 ($10.99 each), which is great value.
- No tools needed for installation
- Only available in white
Though we didn't perform hands-on testing of faucet water filters, we compared dozens of online reviews and customer input to land on a winner: Brita's Elite advanced water filter faucet system.
Brita says this faucet filter removes 99% of contaminants in water, making it a perfect option for your home faucet. It also uses a 100-gallon filter, which the company says will last you approximately four months before you need to swap in a new one. Customers say installation is quick and easy.
- The effectiveness
- Expensive
- Shorter lifespan
The ZeroWater filter was the only one that was able to remove 100% of TDS, making it our No. 1 pick for best pitcher and best filter cartridge. There are a few downsides when it comes to this filter, but they have nothing to do with how it performs.
The ZeroWater replacement filter is on the pricier side, and the filter has to be changed more frequently than the runner-up Brita Elite filter. But if you purchase a 12-pack of the ZeroWater filters, you can save money and spend just over $10 on each one.
Compare water filter pitchers
| Water Filters | Sizes available | Pitcher cost | Replacement filter cost |
|---|---|---|---|
| ZeroWater pitcher | Multiple | $25-$70 | $35 for two |
| Brita standard pitcher | Multiple | $27 | $15 for two |
| Aarke Water Purifier | 80 ounces | $130 | $20 for three |
| Seychelle pH20 | 64 ounces | $80 | $55 for two |
| Waterdrop 10-cup | 80 ounces | $19 | $33 for three |
The water filter that's best suited for you depends on a lot of factors, including how many people are in your household and where you live. U.S. News ranks Hawaii as having the best drinking water quality in the country, with Tennessee and Alabama landing in second and third place respectively. So, if you live in a state that has consistently great drinking water, you might not need a heavy-duty water pitcher.
From our list, your best choice is most likely the Seychelle pH2O alkaline water filter pitcher for the possible health benefits. If you're located in a state with lower-quality drinking water, it's best to stick with our No. 1 pick, a ZeroWater pitcher; during our testing, it was best at removing dissolved solids.
All the water filter pitchers we tested
Here is a list of the other water filter pitchers we've tested:
- AmazonBasics
- Brita Metro Standard
- Brita Everyday
- Brita Longlast Monterey
- Hydros Fast Flo
- Larq UV self-cleaning
- LifeStraw
- Pur Plus
- Soma
Brita is a name everybody is familiar with for a reason, and their filters will serve you well if that's the direction you choose to go. It's not as effective as the ZeroWater, but they are affordable, effective and have a respectable service life before requiring replacement.
An important item to consider when making your choice is the frequency and cost of replacement of the filter itself in your pitcher. The ZeroWater filters are priced at $35 for a two-pack and last for approximately 40 gallons. Brita filters are priced at around $19 in a three-pack and last for the same amount of water. Waterdrop filters last five times as long, at 200 gallons, and are priced at $43 for a two-pack.
Assuming you'll be diligent at replacing the filters on time, these costs can add up over the duration of your use. Be sure to keep in mind that the overall quality of your tap water will affect the life of your filter; better quality water will ease the stress on the filter.
Can you spot the ZeroWater filter? It's the one on the far right.
As you can see in the picture above, the ZeroWater filter on the far right is massive compared to others. That doesn't necessarily equal better performance, but in this case, the ZeroWater did soundly outperform the others in removing contaminants. ZeroWater says its five-stage filter is better at removing particles while preventing mold from growing with use. Based on our testing results, it seems the brand may be onto something.
(Keep in mind that filter life will vary based on the quality of your tap water and how much your filter has to "work" to remove impurities.)
How we test water filter pitchers
As mentioned earlier in this article, there are quite a variety of contaminants worth removing from your tap water. The team here at our lab settled on three primary tests to benchmark the efficacy of these filters: TDS, pH and chlorine. Before we began the actual testing process, each pitcher was removed from the packaging, cleaned and then prepared per the manufacturer's instructions. This is very important, as most of these filters utilize activated carbon filtration, which will deposit sediment into the first batches of water that you filter if not cleaned properly in advance.
Testing for TDS
TDS stands for total dissolved solids and encompasses many different impurities present in water. Examples of the most common TDS include "calcium, magnesium, sodium, potassium, bicarbonate, sulfate, chloride, nitrate and silica," according to the US Geological Survey. In practice, calcium and magnesium deposits in your tap water result in so-called "hard water" that tastes bad and can be actively detrimental to your health at higher concentrations. (Read more about TDS from the EPA and USGS.)
We began TDS testing by mixing an 8-gallon bucket of tap water, measured at 220 ppm TDS, with table salt until we reached a TDS measurement of 300. Generally speaking, 50-150 TDS is considered an ideal range for drinking water. We used an Orapxi water quality tester to take these measurements and since the ZeroWater filter includes a TDS tester as well, all TDS readings were verified on both devices. Once we had established our control source, we measured 1 liter of the 300 TDS water into each of the water filter pitchers and allowed the full quantity to pass through the filter.
Once finished, we measured the TDS again and noted the percentage change. This process was repeated for higher and lower TDS concentrations, and our findings indicate that each of the units we tested is very consistent at removing the same percentage of overall TDS from any water passing through it.
Testing for chlorine
Chlorine in your drinking water may sound strange, but it is actually a very common practice for water treatment facilities to add chlorine to the water supply as a disinfectant. This is extremely effective at getting rid of other, nastier contaminants in the water, but the World Health Organization estimates that a concentration of ~0.2-4 ppm is standard for tap water, indicating that at least some is left over after disinfection.
For our testing, we decided to ramp things up a notch and test water prepared at a concentration similar to that of a swimming pool -- 10 ppm chlorine. This gave us a clear indication of the changes after filtration. Once again, each filter was tested with 1 liter of solution and compared to results from the water prefiltration and once again, filters such as the ZeroWater substantially outperformed the others.
Testing pH changes
Finally, during TDS testing, we also measured the change in pH. pH stands for "potential of hydrogen" and is used to quantify the acidity of a substance. A pH of zero is extremely acidic, seven is considered neither acidic nor basic, and 14 represents an extremely basic substance. Since the minerals that comprise the TDS in tap water increase the alkalinity, we expected the filtration process to decrease the pH of the water. Indeed this did turn out to be the case, and you can see a table of the pH changes below.
Here's a table of our most recent TDS removal test results. The data represents an average of three test runs for each filter pitcher.
Test results
| TDS (% change) | ||
|---|---|---|
| Aarke Purifier | -39 | |
| Brita Metro Standard | -45.6 | |
| Brita Everyday | -45.6 | |
| Brita Longlast | -3.1 | |
| Hydros | -17.5 | |
| Larg self-cleaning | -2.2 | |
| Lifestraw | -2 | |
| Pur Plus | -6 | |
| ZeroWater | -100 |
Which water filter pitcher removes the most impurities?
The ZeroWater pitcher managed to reduce all of the total dissolved solids in my tap water, from an average initial TDS reading of 57 ppm down to zero. Both Brita pitchers with the standard filter tied for second place, with a reduction of TDS from 57 down to 31 (a 45.6% decrease). The stylish (and expensive) Aarke also did well, removing nearly 40% of the TDS from tap water.
Water taste is a bit trickier to measure, but every pitcher did help reduce the slightly metallic taste of my tap water. Unsurprisingly, the ZeroWater pitcher model tasted the best, with no discernible metallic taste or scent.
Overall, the ZeroWater (ZP-010) made our job pretty easy. It completely dominated in terms of removing TDS and also happened to have one of the sturdiest designs. Other good options are here too: The Brita Metro Standard is a great budget filter pitcher that weighs less than ZeroWater's pitchers and has cheaper replacement filters. The Seychelle pH20 is a great pitcher pick if you want to add alkaline to water. Aarke's water purifier is my pick for the most stylish water pitcher with a sturdy build, stainless steel frame and glass pitcher. It costs much more than the others but offers a bit of elegance that few others do.
One thing to note is that we're really testing the filters here and not the pitcher itself. Because most home filter pitchers made by a single brand will use the same filter, you can bet that no matter which size or shape dispenser you choose, the filter should do the same job, for better or worse. ZeroWater, for instance, has a line of about six pitchers, jugs and dispensers in various sizes, all of which use the same very effective five-stage filter. The one caveat within the brands we've tested here is Brita which offers a LongLast filter that did not perform as well as the Legacy Brita filters.
Another big takeaway is just how widely filtered water pitchers can vary, both in terms of performance and even in terms of their key function, as in the case of alkaline pitchers. As long as you identify your needs before you buy, you're bound to find the right filtered water pitcher for you.
Factors to consider when choosing a water filter pitcher
Type of filter
Most standard consumer filter pitchers reduce impurities that affect the taste and purity of water such as chlorine, lead, copper and other heavy metals. Other more expensive filter systems such as reverse osmosis and ion exchange can remove bacteria and viruses from water. For this list, we focused on basic, mechanical filters which comprise the majority of home filter pitcher types. Mechanical water filters, while limited in their function, are some of the most affordable and don't require costly installation.
Size
Before you choose a model, consider how many water drinkers your filter pitcher will be used by. If it's just you or you and one other person, a small or medium pitcher will likely suffice. If your space is occupied by three or four water drinkers, consider a large pitcher or dispenser jug instead.
Materials
The majority of water filter pitchers are made out of plastic. If you prefer a sturdier build there are options for water filter pitchers made from glass and metal to add a refined touch to your H20 experience.
Cost
Consider what you'd like to spend on your filter pitcher. There are options ranging from $20 up to $105 or more. If you opt for an integrated water filter system that filters water before it even reaches your tap, you can expect to pay well into the hundreds.
Consider the cost of the replacement filters, too. Most need to be replaced every three or so months and those costs can add up over the course of a year.